need advice on first armour

[seantrooper]

Sorry guys my bad, I'll only have the bucket that day, can I do a abs bucket in a day?

Maybe..... But not likely.

My

This is for a TK bucket.

You could get the eyes and teeth cut out.

Then you will need to sand the ears and get them right so that the bucket comes together well.

Then you should be able to assemble it. Adding the trim on the frown if you like. As well as some pinch weld around the opening at the base.

Next you can paint the teeth. What colour Grey or Black. (ANH or ESB). And you will also need to paint the ears too.

When that is done you will have to wait until the paint dries.

After that you can glue in the mesh behind the teeth. And the Lenses will need to go in as well.

And finally the decals go on.

Bucket complete.


Now this does not take into account that at every AP there are always any number of distractions. And it doesn't include if you want to have fans in there. Or a comms system....


And don't forget you have to get your head in there as well.

I did mine in 4hrs... I know this as I took photos of mine in bits, and then fully finished... the camera records the time the photo was taken..

from this


to this


So it is doable!!!