Sly's first build E-11 Doopy full resin

[Sly]

Hi all
Today it has begun, Token brown box photo

---

Plastic goodness inside

Attached Files

Thumbnail(s)
   

[Sly]

Whats in the box

---

Sorry, cant seem to get any images to load?????

[Sly]

OK, lets try again
http://s1270.photobucket.com/user/Sly116...sort=3&o=8

---

Started to mod the kit Front sight trimmed, also beginning to cut down and mod the magazine loader and mag I bought from Gazmosis

http://s1270.photobucket.com/user/Sly116...sort=3&o=5

[Bullant]

If you put [i m g] before and [/ i m g] after your photo url (without the spaces), the photos will be embedded in your post like this:

[Sly]

Started trimming a few parts , front sight magazine

---

Also drill out and file parts of the folding stock

Attached Files

Thumbnail(s)
   

[Sly]

Trip to Bunnings for supplies
1x strip of aluminium 20mm wide, 3mm thick for scope rail and a length of 40x40 angle bracket.
Used Billhag TK-1650so build guide and hey pressto!!!

---

Now to see how its going to look and fit

---

Not too shabby, so far

---

Drilled out the blobs at the barrel and replaced with Hex bolts

[stormraven]

Looking good Sly should look really good when you're finished.

[Sly]

Thanks Stormraven, early days though, still plenty I can stuff up.
Hope the finished product comes up ok.

[Sly]

Decided to start work on the pistol grip, first drilling out the dodgy resin hex bolt with a 10mm drill bit or a 3/8 if you like.
then cut the thread off a 10mm hex bolt to be placed in the hole

---

Will glue the bolt head in a a later date

[Oevil1]

Looking good mate! Stay on target... :-)

[Sly]

Now on the trigger, not an original idea as I got this from another build thread.
Mark lines on the trigger for positioning, cut a piece of coat hanger as the pivot, and cannibalise a pen for a spring.

---

The hole for the pin is only partially drilled into the opposite side, the pin will be cut to length and the hole puttied over before painting.

---

Then drilled a hole in the top of the trigger, slowly, slowly. Drill a hole on an angle into the base of the grip, to stop the spring from moving or ever popping out.

---

---

Forward position.


Back position.

[Agent Smith]

Mate that is going to be first class ..nice work.

[Sly]

Thought I would start work on power cylinders.
found the right size nuts and bolts at Brisbane Fasteners at Brendale


Sorry for the out of focus photo

---

First I ground the resin bolts off the front, then very carefully drilled the holes to screw the very small bolts into.
Once ready for final assembley I will grind the heads off and locktight the nets in place.

---

Checking for alignment

[Duras]

Oooh nice... Will have to look that place up as need some fasteners. I lost one of the ones from the kit I bought

[Oevil1]

Sweet job on the trigger! Everyone wants to squeeze the trigger!
And yes...Brisbane Fasteners is my second home too. That and Pine Rivers Bearings!