Terror's Doopydoo's Full resin E-11 build x 2

[TerrorFirma]

Right we start with the base components in the Doopy's kit as per this and the previous pictures

---

Once all cleaned up and flashing removed start to progress with the trigger and grip screwed into the main barrel. At this point check for fitment, screw it in, sand and scrape as required to get the perfect fit. once ok then glue and screw.

---

Then start on the scope/counter bracket. This can be picked up from Bunning's and Masters for the rail. Measure twice and cut once. Drill your pilot hole in the rear of the bracket and also match the hole on the rear of the barrel. Mount the rail and then locate the scope and counter, mark holes and drill. Again trial fit and once happy then glue and screw.

---

I did my paint work in 2 sections, once your main barrel and grip is complete I primed, silver coat and 2 satin black coats. Trial fit the scope assembly and paint that separately.

---

Then for final coats of black and also the clear coats. Add the reticule kit as supplied from Oevil1 to the scope with supaglue and the weapon is complete. Personal choice to weather as needed.









Terror